Agentless Management Service for Windows X64 By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee. | Type: | Software - System Management | | Version: | 1.30.0.0(26 Jun 2018) | | Operating System(s): | | Microsoft Windows Server 2012 R2 | | Microsoft Windows Server 2016 |
Microsoft Windows 10 (64-bit) | | Multi-part download | | File name: | cp034101.compsig (2.0 KB) | | File name: | cp034101.exe (9.8 MB) |
Provides out of band management system with OS-level Agentless Management information and Active Health System events. - Added support for the following IO devices:
- HPE Synergy 4820C 10/20/25Gb Converged Network Adapter
- HPE StorFabric CN1200R-T Converged Network Adapter
- HPE StorFabric CN1300R Converged Network Adapter
- HPE Synergy 6410C 25/50Gb Ethernet Adapter
- HPE Ethernet 100Gb 1-port 842QSFP28 Adapter
- HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter
- Added the following enhancements to Control Panel Applet:
- Up to 8 trap destinations are supported in SNMP tab, along with user configuration and SNMPv3 settings
- SNMP tab is now fully functional if iLO5 encryption is set to HighSecurity or FIPS mode
- Button options are available to start, stop, enable or disable SMA service
- GUI options are available to select time format and input the optional periodic test trap interval
- Help content has expanded
- SMA (System Management Assistant) service now supports all MIB OIDs and traps generated by iLO5 FW.
- Added support for System Chassis Class of IML Events in Windows Event Log.
- iSCSI MIB condition is now available in cpqHoMibHealthStatusArray.
- AHS (Active Health System) NIC Link records now contain Interface Description string.
Prerequisites:
The Channel Interface Driver for Windows X64 must be installed prior to this component. Microsoft SNMP Service must be enabled, if SMA (System Management Assistant) is enabled. To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values: | d9b9fe469950138ef4d7e560d35d5ec2354302d409eaf1ba07ccb3e6655494fb | cp034101.compsig | | 18a7e598601ec97ddb1a6a06c5a9b95cd7520e081ce3a5072a85944750ebdbc3 | cp034101.exe |
Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained. Installation:
Place the Smart Component in a temporary directory, then double-click it to run. Select 'Install' to start extracting to a temporary location on the hard drive. Click the 'Install' button to perform the service installation. End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Important:
About installation and enablement of SMA service: - During AMS installation in interactive mode, there is pop up message to selectively install SMA.
- If Yes is selected, SMA service will be installed and set to running state.
- If No is selected, SMA service will be installed but the service is not enabled.
- During AMS installation in silent mode, SMA is installed but the service is not enabled.
- To enable SMA service at a later time, go to the following folder: %ProgramFiles%OEMAMSService (Typically c:Program FilesOEMAMSService) and execute 'EnableSma.bat /f'
- IMPORTANT: The SNMP service community name and permission must be also be setup. This is not done by 'EnableSma.bat'.
- To disable SMA after it has been enabled, go the the following folder: %ProgramFiles%OEMAMSService (Typically c:Program FilesOEMAMSService) and execute 'DisableSma.bat /f'
- After installing Windows operating system, make sure all the latest Microsoft Updates are downloaded and installed (wuapp.exe can be launched to start the update process). If this is not done, a critical error may be reported in Windows Event Log, 'The Agentless Management Service terminated unexpectedly.'.
AMS Control Panel Applet: Notes:
- IML events marked as repaired in ILO will not be mirrored in Windows Event Log.
- If Windows Server 2016 Device Guard policy is enabled, AMS can be upgraded from an older version to a newer version, but it cannot be uninstalled. To uninstall AMS, the Device Guard policy needs to be temporarily disabled.
- AMS Control Panel applet 'SNMP' tab does not show SNMP settings and does not allow test trap generation
when iLO5 encryption is set to SuiteB NSA mode. Please use iLO5->Management page as an alternate option.
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - AMS service no longer terminates unexpectedly if the server had more than 9 IPV6 addresses. However, cpqNicIfLogMapIPV6Address OID will only return up to 9 IPV6 addresses.
- Traps 1015, 1019,1020 now have correct varbind info, consistent with MIB definitions.
- When SMA (System Management Assistant) service is stopped or disabled, SMA will no longer respond to SNMP queries with outdated data.
About installation and enablement of SMA service: - During AMS installation in interactive mode, there is pop up message to selectively install SMA.
- If Yes is selected, SMA service will be installed and set to running state.
- If No is selected, SMA service will be installed but the service is not enabled.
- During AMS installation in silent mode, SMA is installed but the service is not enabled.
- To enable SMA service at a later time, go to the following folder: %ProgramFiles%OEMAMSService (Typically c:Program FilesOEMAMSService) and execute 'EnableSma.bat /f'
- IMPORTANT: The SNMP service community name and permission must be also be setup. This is not done by 'EnableSma.bat'.
- To disable SMA after it has been enabled, go the the following folder: %ProgramFiles%OEMAMSService (Typically c:Program FilesOEMAMSService) and execute 'DisableSma.bat /f'
- After installing Windows operating system, make sure all the latest Microsoft Updates are downloaded and installed (wuapp.exe can be launched to start the update process). If this is not done, a critical error may be reported in Windows Event Log, 'The Agentless Management Service terminated unexpectedly.'.
AMS Control Panel Applet: Version:2.30.1.0 (15 Oct 2020) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Fixed string encoding issue on CpqHoName
(5 Oct 2020) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Fixed the incorrect AHCI SATA drive information.
- Fixed the AMS 'Not available' state in iLO UI if iLO has been idle for a while.
- Fixed the AMS terminated unexpectedly
- Fixed the minor memory leak in AMS
- Added two IDE traps (14008 and 14009).
- Added support for new MIB cpqiScsiSessionId to populate full session ID when iSCSI session is established.
- Reported IPv6 address.
- Added support for new I/O cards
(9 Mar 2020) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Fixed the intermittent failure to query SNMP data from OS IP address(es). (20 Dec 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Fixed the unexpected SNMP Trap 11020 being generated even if there is no change in health status. The issue was caused by SNMP cpqHoMibHealthStatusArray OID value being OK (2) even if the corresponding hardware is not present. The default condition has been changed to Unknown (0).
- AMS generated events in Windows Event Log are now readable even if AMS is uninstalled
- Enhanced display of IML events in Windows System Log to separate event details from recommended action
- Added support for Smart Array P824i-p MR controller external box information in SNMP OIDs cpqSasPhyDrvSsBoxModel, cpqSasPhyDrvSsBoxFwRev, cpqSasPhyDrvSsBoxVendor and cpqSasPhyDrvSsBoxSerialNumber.
- Added support for 9 or more SATA drives in the server
- Support for new I/O cards
(9 Sep 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Fixed the minor memory leak in ams.exe process.
- Fixed the security vulnerability of missing double-quote (') character in ImagePath value of AMS service in the registry.
(14 Apr 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Fixed the AMS handle count increase when there is no HPE Smart Array P824 MR controller installed or when System Center Operations Manager Management Pack is installed.
- Added support for HPE Synergy 6820C 25/50Gb CNA.
(22 Jan 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Fixed the issue of AMS terminating unexpectedly on module w2kmgams.dll.
The Agentless Management Service may stop unexpectedly with the following error event logged in Windows Application Event Log: Event ID: 1000, Source: Application Error, Faulting Application Name: ams.exe, Faulting Module Name: w2kmgAMS.dll. - Fixed the issue of missing nechesasr.sys in HPE Software inventory.
iLO 5 Automatic Server Recovery Driver for Windows Server 2016 and Server 2019 (cp035140.exe) failed to install on Windows Server 2019 OS deployment using Smart Update tool in SPP v2018.11.0. Refer to the following Customer Advisories for details of the critical issues fixed in this release. •a00065356en_us (https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00065356en_us) •a00065641en_us (https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00065641en_us) - Added configurable polling interval option in the registry for Active Health System (AHS) logging of host CPU and Memory utilization:
- CPU and Memory utilization used to be logged to AHS every minute, thus potentially causing AHS storage to be full.
- CPU and Memory utilization is now logged to AHS once upon startup, but a registry key can be created to log more if needed.
Registry key: HKLMSystemHPAMSAHS, Registry value: QuietPeriodInMinutes (DWORD), from 1 minute to 1440 minutes (i.e. 1 day).
- Added configurable logging feature to generate log files on local host. The default log size will be 64MB, log level will be Informational(1) and file path: %ProgramFiles%OEMAMSLogs.
The optional log file size, path and level can be modified by changing the registry values at : HKLMSYSTEMAMSLOGCFG - The AMS control panel applet is updated to support SNMP configurations with iLO CNSA encryption mode as well.
(27 Nov 2018) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. None. Added support for Microsoft Windows Server 2019. (26 Jun 2018) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - AMS service no longer terminates unexpectedly if the server had more than 9 IPV6 addresses. However, cpqNicIfLogMapIPV6Address OID will only return up to 9 IPV6 addresses.
- Traps 1015, 1019,1020 now have correct varbind info, consistent with MIB definitions.
- When SMA (System Management Assistant) service is stopped or disabled, SMA will no longer respond to SNMP queries with outdated data.
- Added support for the following IO devices:
- HPE Synergy 4820C 10/20/25Gb Converged Network Adapter
- HPE StorFabric CN1200R-T Converged Network Adapter
- HPE StorFabric CN1300R Converged Network Adapter
- HPE Synergy 6410C 25/50Gb Ethernet Adapter
- HPE Ethernet 100Gb 1-port 842QSFP28 Adapter
- HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter
- Added the following enhancements to Control Panel Applet:
- Up to 8 trap destinations are supported in SNMP tab, along with user configuration and SNMPv3 settings
- SNMP tab is now fully functional if iLO5 encryption is set to HighSecurity or FIPS mode
- Button options are available to start, stop, enable or disable SMA service
- GUI options are available to select time format and input the optional periodic test trap interval
- Help content has expanded
- SMA (System Management Assistant) service now supports all MIB OIDs and traps generated by iLO5 FW.
- Added support for System Chassis Class of IML Events in Windows Event Log.
- iSCSI MIB condition is now available in cpqHoMibHealthStatusArray.
- AHS (Active Health System) NIC Link records now contain Interface Description string.
(5 Feb 2018) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. None - Added support for the following device:
- HPE Smart Array P824i-p MR Adapter (cpqSasHbaModel: sasP824ip(14)) - Added support for the following MIB OIDs:
- cpqIdeAtaDiskMaximumOperatingTemp
- cpqIdeAtaDiskDestructiveOperatingTemp
- cpqSasLogDrvTable - Added support for a new Active Health System (AHS) record: 'OS Logical Disk Usage'
- Added UTF-8 support for Japanese characters to show correctly on iLO GUI
- Enhanced AMS Control Panel Applet Help content
- Added button options in AMS Control Panel Applet to start/stop AMS service, or enable/disable SMA service
(15 Jan 2018) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Imazing 2 8 4. none Added support for Microsoft Windows 10 (64-bit) operating system. (25 Sep 2017) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - The overall network and controller status are no longer shown degraded on iLO GUI when an FC/FCoE port is not connected.
- AMS no longer terminates intermittently after the service is started on systems with NVMe drives.
- AMS no longer terminates on systems with Windows Server 2012 R2 and missing KB2919355.
- AMS extends the default data polling interval from 30 seconds to 2 minutes, consequently CPU utilization increases less frequently.
(12 Jul 2017) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Initial release of 'Agentless Management Service for Windows X64' | Type: | Software - System Management | | Version: | 1.30.0.0(26 Jun 2018) | | Operating System(s): | | Microsoft Windows 10 (64-bit) | | Microsoft Windows Server 2012 R2 | | Microsoft Windows Server 2016 |
|
DescriptionProvides out of band management system with OS-level Agentless Management information and Active Health System events. Enhancements- Added support for the following IO devices:
- HPE Synergy 4820C 10/20/25Gb Converged Network Adapter
- HPE StorFabric CN1200R-T Converged Network Adapter
- HPE StorFabric CN1300R Converged Network Adapter
- HPE Synergy 6410C 25/50Gb Ethernet Adapter
- HPE Ethernet 100Gb 1-port 842QSFP28 Adapter
- HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter
- Added the following enhancements to Control Panel Applet:
- Up to 8 trap destinations are supported in SNMP tab, along with user configuration and SNMPv3 settings
- SNMP tab is now fully functional if iLO5 encryption is set to HighSecurity or FIPS mode
- Button options are available to start, stop, enable or disable SMA service
- GUI options are available to select time format and input the optional periodic test trap interval
- Help content has expanded
- SMA (System Management Assistant) service now supports all MIB OIDs and traps generated by iLO5 FW.
- Added support for System Chassis Class of IML Events in Windows Event Log.
- iSCSI MIB condition is now available in cpqHoMibHealthStatusArray.
- AHS (Active Health System) NIC Link records now contain Interface Description string.
Installation InstructionsPrerequisites:
The Channel Interface Driver for Windows X64 must be installed prior to this component. Microsoft SNMP Service must be enabled, if SMA (System Management Assistant) is enabled. To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values: | d9b9fe469950138ef4d7e560d35d5ec2354302d409eaf1ba07ccb3e6655494fb | cp034101.compsig | | 18a7e598601ec97ddb1a6a06c5a9b95cd7520e081ce3a5072a85944750ebdbc3 | cp034101.exe |
Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained. Installation:
Place the Smart Component in a temporary directory, then double-click it to run. Select 'Install' to start extracting to a temporary location on the hard drive. Click the 'Install' button to perform the service installation. Release NotesEnd User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Important:
About installation and enablement of SMA service: - During AMS installation in interactive mode, there is pop up message to selectively install SMA.
- If Yes is selected, SMA service will be installed and set to running state.
- If No is selected, SMA service will be installed but the service is not enabled.
- During AMS installation in silent mode, SMA is installed but the service is not enabled.
- To enable SMA service at a later time, go to the following folder: %ProgramFiles%OEMAMSService (Typically c:Program FilesOEMAMSService) and execute 'EnableSma.bat /f'
- IMPORTANT: The SNMP service community name and permission must be also be setup. This is not done by 'EnableSma.bat'.
- To disable SMA after it has been enabled, go the the following folder: %ProgramFiles%OEMAMSService (Typically c:Program FilesOEMAMSService) and execute 'DisableSma.bat /f'
- After installing Windows operating system, make sure all the latest Microsoft Updates are downloaded and installed (wuapp.exe can be launched to start the update process). If this is not done, a critical error may be reported in Windows Event Log, 'The Agentless Management Service terminated unexpectedly.'.
AMS Control Panel Applet: Notes:
- IML events marked as repaired in ILO will not be mirrored in Windows Event Log.
- If Windows Server 2016 Device Guard policy is enabled, AMS can be upgraded from an older version to a newer version, but it cannot be uninstalled. To uninstall AMS, the Device Guard policy needs to be temporarily disabled.
- AMS Control Panel applet 'SNMP' tab does not show SNMP settings and does not allow test trap generation
when iLO5 encryption is set to SuiteB NSA mode. Please use iLO5->Management page as an alternate option.
FixesUpgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - AMS service no longer terminates unexpectedly if the server had more than 9 IPV6 addresses. However, cpqNicIfLogMapIPV6Address OID will only return up to 9 IPV6 addresses.
- Traps 1015, 1019,1020 now have correct varbind info, consistent with MIB definitions.
- When SMA (System Management Assistant) service is stopped or disabled, SMA will no longer respond to SNMP queries with outdated data.
ImportantAbout installation and enablement of SMA service: - During AMS installation in interactive mode, there is pop up message to selectively install SMA.
- If Yes is selected, SMA service will be installed and set to running state.
- If No is selected, SMA service will be installed but the service is not enabled.
- During AMS installation in silent mode, SMA is installed but the service is not enabled.
- To enable SMA service at a later time, go to the following folder: %ProgramFiles%OEMAMSService (Typically c:Program FilesOEMAMSService) and execute 'EnableSma.bat /f'
- IMPORTANT: The SNMP service community name and permission must be also be setup. This is not done by 'EnableSma.bat'.
- To disable SMA after it has been enabled, go the the following folder: %ProgramFiles%OEMAMSService (Typically c:Program FilesOEMAMSService) and execute 'DisableSma.bat /f'
- After installing Windows operating system, make sure all the latest Microsoft Updates are downloaded and installed (wuapp.exe can be launched to start the update process). If this is not done, a critical error may be reported in Windows Event Log, 'The Agentless Management Service terminated unexpectedly.'.
AMS Control Panel Applet: Revision HistoryVersion:2.30.1.0 (15 Oct 2020) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Fixed string encoding issue on CpqHoName
(5 Oct 2020) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Fixed the incorrect AHCI SATA drive information.
- Fixed the AMS 'Not available' state in iLO UI if iLO has been idle for a while.
- Fixed the AMS terminated unexpectedly
- Fixed the minor memory leak in AMS
- Added two IDE traps (14008 and 14009).
- Added support for new MIB cpqiScsiSessionId to populate full session ID when iSCSI session is established.
- Reported IPv6 address.
- Added support for new I/O cards
(9 Mar 2020) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Focus 1 9 14 nasb. Fixed the intermittent failure to query SNMP data from OS IP address(es). (20 Dec 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Fixed the unexpected SNMP Trap 11020 being generated even if there is no change in health status. The issue was caused by SNMP cpqHoMibHealthStatusArray OID value being OK (2) even if the corresponding hardware is not present. The default condition has been changed to Unknown (0).
- AMS generated events in Windows Event Log are now readable even if AMS is uninstalled
- Enhanced display of IML events in Windows System Log to separate event details from recommended action
- Added support for Smart Array P824i-p MR controller external box information in SNMP OIDs cpqSasPhyDrvSsBoxModel, cpqSasPhyDrvSsBoxFwRev, cpqSasPhyDrvSsBoxVendor and cpqSasPhyDrvSsBoxSerialNumber.
- Added support for 9 or more SATA drives in the server
- Support for new I/O cards
(9 Sep 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Fixed the minor memory leak in ams.exe process.
- Fixed the security vulnerability of missing double-quote (') character in ImagePath value of AMS service in the registry.
(14 Apr 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Fixed the AMS handle count increase when there is no HPE Smart Array P824 MR controller installed or when System Center Operations Manager Management Pack is installed.
- Added support for HPE Synergy 6820C 25/50Gb CNA.
(22 Jan 2019) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - Fixed the issue of AMS terminating unexpectedly on module w2kmgams.dll.
The Agentless Management Service may stop unexpectedly with the following error event logged in Windows Application Event Log: Event ID: 1000, Source: Application Error, Faulting Application Name: ams.exe, Faulting Module Name: w2kmgAMS.dll. - Fixed the issue of missing nechesasr.sys in HPE Software inventory.
iLO 5 Automatic Server Recovery Driver for Windows Server 2016 and Server 2019 (cp035140.exe) failed to install on Windows Server 2019 OS deployment using Smart Update tool in SPP v2018.11.0. Refer to the following Customer Advisories for details of the critical issues fixed in this release. •a00065356en_us (https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00065356en_us) •a00065641en_us (https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00065641en_us) - Added configurable polling interval option in the registry for Active Health System (AHS) logging of host CPU and Memory utilization:
- CPU and Memory utilization used to be logged to AHS every minute, thus potentially causing AHS storage to be full.
- CPU and Memory utilization is now logged to AHS once upon startup, but a registry key can be created to log more if needed.
Registry key: HKLMSystemHPAMSAHS, Registry value: QuietPeriodInMinutes (DWORD), from 1 minute to 1440 minutes (i.e. 1 day).
- Added configurable logging feature to generate log files on local host. The default log size will be 64MB, log level will be Informational(1) and file path: %ProgramFiles%OEMAMSLogs.
The optional log file size, path and level can be modified by changing the registry values at : HKLMSYSTEMAMSLOGCFG - The AMS control panel applet is updated to support SNMP configurations with iLO CNSA encryption mode as well.
(27 Nov 2018) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. None. Added support for Microsoft Windows Server 2019. (26 Jun 2018) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - AMS service no longer terminates unexpectedly if the server had more than 9 IPV6 addresses. However, cpqNicIfLogMapIPV6Address OID will only return up to 9 IPV6 addresses.
- Traps 1015, 1019,1020 now have correct varbind info, consistent with MIB definitions.
- When SMA (System Management Assistant) service is stopped or disabled, SMA will no longer respond to SNMP queries with outdated data.
- Added support for the following IO devices:
- HPE Synergy 4820C 10/20/25Gb Converged Network Adapter
- HPE StorFabric CN1200R-T Converged Network Adapter
- HPE StorFabric CN1300R Converged Network Adapter
- HPE Synergy 6410C 25/50Gb Ethernet Adapter
- HPE Ethernet 100Gb 1-port 842QSFP28 Adapter
- HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter
- Added the following enhancements to Control Panel Applet:
- Up to 8 trap destinations are supported in SNMP tab, along with user configuration and SNMPv3 settings
- SNMP tab is now fully functional if iLO5 encryption is set to HighSecurity or FIPS mode
- Button options are available to start, stop, enable or disable SMA service
- GUI options are available to select time format and input the optional periodic test trap interval
- Help content has expanded
- SMA (System Management Assistant) service now supports all MIB OIDs and traps generated by iLO5 FW.
- Added support for System Chassis Class of IML Events in Windows Event Log.
- iSCSI MIB condition is now available in cpqHoMibHealthStatusArray.
- AHS (Active Health System) NIC Link records now contain Interface Description string.
(5 Feb 2018) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. None - Added support for the following device:
- HPE Smart Array P824i-p MR Adapter (cpqSasHbaModel: sasP824ip(14)) - Added support for the following MIB OIDs:
- cpqIdeAtaDiskMaximumOperatingTemp
- cpqIdeAtaDiskDestructiveOperatingTemp
- cpqSasLogDrvTable - Added support for a new Active Health System (AHS) record: 'OS Logical Disk Usage'
- Added UTF-8 support for Japanese characters to show correctly on iLO GUI
- Enhanced AMS Control Panel Applet Help content
- Added button options in AMS Control Panel Applet to start/stop AMS service, or enable/disable SMA service
(15 Jan 2018) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. none Added support for Microsoft Windows 10 (64-bit) operating system. (25 Sep 2017) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. - The overall network and controller status are no longer shown degraded on iLO GUI when an FC/FCoE port is not connected.
- AMS no longer terminates intermittently after the service is started on systems with NVMe drives.
- AMS no longer terminates on systems with Windows Server 2012 R2 and missing KB2919355.
- AMS extends the default data polling interval from 30 seconds to 2 minutes, consequently CPU utilization increases less frequently.
(12 Jul 2017) Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Initial release of 'Agentless Management Service for Windows X64' |
|
